Endocardial repolarization dispersion in BrS: A novel automatic algorithm for mapping activation recovery interval.

INTRODUCTION: Repolarization dispersion in the right ventricular outflow tract (RVOT) contributes to the type-1 electrocardiographic (ECG) phenotype of Brugada syndrome (BrS), while data on the significance and feasibility of mapping repolarization dispersion in BrS patients are scarce. Moreover, the role of endocardial repolarization dispersion in BrS is poorly investigated. We aimed to assess endocardial repolarization patterns through an automated calculation of activation recovery interval (ARI) estimated on unipolar electrograms (UEGs) in spontaneous type-1 BrS patients and controls; we also investigated the relation between ARI and right ventricle activation time (RVAT), and T-wave peak-to-end interval (Tpe) in BrS patients. METHODS: Patients underwent endocardial high-density electroanatomical mapping (HDEAM); BrS showing an overt type-1 ECG were defined as OType1, while those without (latent type-1 ECG and LType1) received ajmaline infusion. BrS patients only underwent programmed ventricular stimulation (PVS). Data were elaborated to obtain ARI corrected with the Bazett formula (ARIc), while RVAT was derived from activation maps. RESULTS: 39 BrS subjects (24 OType1 and 15 LTtype1) and 4 controls were enrolled. OType1 and post-ajmaline LType1 showed longer mean ARIc than controls (306 ± 27.3 ms and 333.3 ± 16.3 ms vs. 281.7 ± 10.3 ms, p = .05 and p < .001, respectively). Ajmaline induced a significant prolongation of ARIc compared to pre-ajmaline LTtype1 (333.3 ± 16.3 vs. 303.4 ± 20.7 ms, p < .001) and OType1 (306 ± 27.3 ms, p < .001). In patients with type-1 ECG (OTtype1 and post-ajmaline LType1) ARIc correlated with RVAT (r = .34, p = .04) and Tpec (r = .60, p < .001), especially in OType1 subjects (r = .55, p = .008 and r = .65 p < .001, respectively). CONCLUSION: ARIc mapping demonstrates increased endocardial repolarization dispersion in RVOT in BrS. Endocardial ARIc positively correlates with RVAT and Tpec, especially in OType1.

Skin Conductance-Based Acupoint and Non-Acupoint Recognition Using Machine Learning.

Acupoints (APs) prove to have positive effects on disease diagnosis and treatment, while intelligent techniques for the automatic detection of APs are not yet mature, making them more dependent on manual positioning. In this paper, we realize the skin conductance-based APs and non-APs recognition with machine learning, which could assist in APs detection and localization in clinical practice. Firstly, we collect skin conductance of traditional Five-Shu Point and their corresponding non-APs with wearable sensors, establishing a dataset containing over 36000 samples of 12 different AP types. Then, electrical features are extracted from the time domain, frequency domain, and nonlinear perspective respectively, following which typical machine learning algorithms (SVM, RF, KNN, NB, and XGBoost) are demonstrated to recognize APs and non-APs. The results demonstrate XGBoost with the best precision of 66.38%. Moreover, we also quantify the impacts of the differences among AP types and individuals, and propose a pairwise feature generation method to weaken the impacts on recognition precision. By using generated pairwise features, the recognition precision could be improved by 7.17%. The research systematically realizes the automatic recognition of APs and non-APs, and is conducive to pushing forward the intelligent development of APs and Traditional Chinese Medicine theories.

EEG rhythm separation and time-frequency analysis of fast multivariate empirical mode decomposition for motor imagery BCI.

Motor imagery electroencephalogram (EEG) is widely employed in brain-computer interface (BCI) systems. As a time-frequency analysis method for nonlinear and non-stationary signals, multivariate empirical mode decomposition (MEMD) and its noise-assisted version (NA-MEMD) has been widely used in the preprocessing step of BCI systems for separating EEG rhythms corresponding to specific brain activities. However, when applied to multichannel EEG signals, MEMD or NA-MEMD often demonstrate low robustness to noise and high computational complexity. To address these issues, we have explored the advantages of our recently proposed fast multivariate empirical mode decomposition (FMEMD) and its noise-assisted version (NA-FMEMD) for analyzing motor imagery data. We emphasize that FMEMD enables a more accurate estimation of EEG frequency information and exhibits a more noise-robust decomposition performance with improved computational efficiency. Comparative analysis with MEMD on simulation data and real-world EEG validates the above assertions. The joint average frequency measure is employed to automatically select intrinsic mode functions that correspond to specific frequency bands. Thus, FMEMD-based classification architecture is proposed. Using FMEMD as a preprocessing algorithm instead of MEMD can improve the classification accuracy by 2.3% on the BCI Competition IV dataset. On the Physiobank Motor/Mental Imagery dataset and BCI Competition IV Dataset 2a, FMEMD-based architecture also attained a comparable performance to complex algorithms. The results indicate that FMEMD proficiently extracts feature information from small benchmark datasets while mitigating dimensionality constraints resulting from computational complexity. Hence, FMEMD or NA-FMEMD can be a powerful time-frequency preprocessing method for BCI.

Functional Connectivity and Feature Fusion Enhance Multiclass Motor-Imagery Brain-Computer Interface Performance.

(1) Background: in the field of motor-imagery brain-computer interfaces (MI-BCIs), obtaining discriminative features among multiple MI tasks poses a significant challenge. Typically, features are extracted from single electroencephalography (EEG) channels, neglecting their interconnections, which leads to limited results. To address this limitation, there has been growing interest in leveraging functional brain connectivity (FC) as a feature in MI-BCIs. However, the high inter- and intra-subject variability has so far limited its effectiveness in this domain. (2) Methods: we propose a novel signal processing framework that addresses this challenge. We extracted translation-invariant features (TIFs) obtained from a scattering convolution network (SCN) and brain connectivity features (BCFs). Through a feature fusion approach, we combined features extracted from selected channels and functional connectivity features, capitalizing on the strength of each component. Moreover, we employed a multiclass support vector machine (SVM) model to classify the extracted features. (3) Results: using a public dataset (IIa of the BCI Competition IV), we demonstrated that the feature fusion approach outperformed existing state-of-the-art methods. Notably, we found that the best results were achieved by merging TIFs with BCFs, rather than considering TIFs alone. (4) Conclusions: our proposed framework could be the key for improving the performance of a multiclass MI-BCI system.

Evaluation of deep marginal feedback cancellation for hearing aids using speech and music.

Speech and music both play fundamental roles in daily life. Speech is important for communication while music is important for relaxation and social interaction. Both speech and music have a large dynamic range. This does not pose problems for listeners with normal hearing. However, for hearing-impaired listeners, elevated hearing thresholds may result in low-level portions of sound being inaudible. Hearing aids with frequency-dependent amplification and amplitude compression can partly compensate for this problem. However, the gain required for low-level portions of sound to compensate for the hearing loss can be larger than the maximum stable gain of a hearing aid, leading to acoustic feedback. Feedback control is used to avoid such instability, but this can lead to artifacts, especially when the gain is only just below the maximum stable gain. We previously proposed a deep-learning method called DeepMFC for controlling feedback and reducing artifacts and showed that when the sound source was speech DeepMFC performed much better than traditional approaches. However, its performance using music as the sound source was not assessed and the way in which it led to improved performance for speech was not determined. The present paper reveals how DeepMFC addresses feedback problems and evaluates DeepMFC using speech and music as sound sources with both objective and subjective measures. DeepMFC achieved good performance for both speech and music when it was trained with matched training materials. When combined with an adaptive feedback canceller it provided over 13 dB of additional stable gain for hearing-impaired listeners.

Real-Time Magnetocardiography with Passive Miniaturized Coil Array in Earth Ambient Field.

We demonstrate a magnetocardiography (MCG) sensor that operates in non-shielded environments, in real-time, and without the need for an accompanying device to identify the cardiac cycles for averaging. We further validate the sensor's performance on human subjects. Our approach integrates seven (7) coils, previously optimized for maximum sensitivity, into a coil array. Based on Faraday's law, magnetic flux from the heart is translated into voltage across the coils. By leveraging digital signal processing (DSP), namely, bandpass filtering and averaging across coils, MCG can be retrieved in real-time. Our coil array can monitor real-time human MCG with clear QRS complexes in non-shielded environments. Intra- and inter-subject variability tests confirm repeatability and accuracy comparable to gold-standard electrocardiography (ECG), viz., a cardiac cycle detection accuracy of >99.13% and averaged R-R interval accuracy of <5.8 ms. Our results confirm the feasibility of real-time R-peak detection using the MCG sensor, as well as the ability to retrieve the full MCG spectrum as based upon the averaging of cycles identified via the MCG sensor itself. This work provides new insights into the development of accessible, miniaturized, safe, and low-cost MCG tools.

Molecular Computation for Molecular Classification.

DNA as an informational polymer has, for the past 30 years, progressively become an essential molecule to rationally build chemical reaction networks endowed with powerful signal-processing capabilities. Whether influenced by the silicon world or inspired by natural computation, molecular programming has gained attention for diagnosis applications. Of particular interest for this review, molecular classifiers have shown promising results for disease pattern recognition and sample classification. Because both input integration and computation are performed in a single tube, at the molecular level, this low-cost approach may come as a complementary tool to molecular profiling strategies, where all biomarkers are quantified independently using high-tech instrumentation. After introducing the elementary components of molecular classifiers, some of their experimental implementations are discussed either using digital Boolean logic or analog neural network architectures.

Towards a Machine Learning-Based Digital Twin for Non-Invasive Human Bio-Signal Fusion.

Human bio-signal fusion is considered a critical technological solution that needs to be advanced to enable modern and secure digital health and well-being applications in the metaverse. To support such efforts, we propose a new data-driven digital twin (DT) system to fuse three human physiological bio-signals: heart rate (HR), breathing rate (BR), and blood oxygen saturation level (SpO2). To accomplish this goal, we design a computer vision technology based on the non-invasive photoplethysmography (PPG) technique to extract raw time-series bio-signal data from facial video frames. Then, we implement machine learning (ML) technology to model and measure the bio-signals. We accurately demonstrate the digital twin capability in the modelling and measuring of three human bio-signals, HR, BR, and SpO2, and achieve strong performance compared to the ground-truth values. This research sets the foundation and the path forward for realizing a holistic human health and well-being DT model for real-world medical applications.

Hybrid fuzzy deep neural network toward temporal-spatial-frequency features learning of motor imagery signals.

Achieving an efficient and reliable method is essential to interpret a user's brain wave and deliver an accurate response in biomedical signal processing. However, EEG patterns exhibit high variability across time and uncertainty due to noise and it is a significant problem to be addressed in mental task as motor imagery. Therefore, fuzzy components may help to enable a higher tolerance to noisy conditions. With the advent of Deep Learning and its considerable contributions to Artificial intelligence and data analysis, numerous efforts have been made to evaluate and analyze brain signals. In this study, to make use of neural activity phenomena, the feature extraction preprocessing is applied based on Multi-scale filter bank CSP. In the following, the hybrid series architecture named EEG-CLFCNet is proposed which extract the frequency and spatial features by Compact-CNN and the temporal features by the LSTM network. However, the classification results are evaluated by merging the fully connected network and fuzzy neural block. Here, the proposed method is further validated by the BCI competition IV-2a dataset and compare with two hyperparameter tuning methods, Coordinate-descent and Bayesian optimization algorithm. The proposed architecture that used fuzzy neural block and Bayesian optimization as tuning approach, results in better classification accuracy compared with the state-of-the-art literatures. As results shown, the remarkable performance of the proposed model, EEG-CLFCNet, and the general integration of fuzzy units to other classifiers would pave the way for enhanced MI-based BCI systems.

[Multi-task motor imagery electroencephalogram classification based on adaptive time-frequency common spatial pattern combined with convolutional neural network].

The effective classification of multi-task motor imagery electroencephalogram (EEG) is helpful to achieve accurate multi-dimensional human-computer interaction, and the high frequency domain specificity between subjects can improve the classification accuracy and robustness. Therefore, this paper proposed a multi-task EEG signal classification method based on adaptive time-frequency common spatial pattern (CSP) combined with convolutional neural network (CNN). The characteristics of subjects' personalized rhythm were extracted by adaptive spectrum awareness, and the spatial characteristics were calculated by using the one-versus-rest CSP, and then the composite time-domain characteristics were characterized to construct the spatial-temporal frequency multi-level fusion features. Finally, the CNN was used to perform high-precision and high-robust four-task classification. The algorithm in this paper was verified by the self-test dataset containing 10 subjects (33 ± 3 years old, inexperienced) and the dataset of the 4th 2018 Brain-Computer Interface Competition (BCI competition Ⅳ-2a). The average accuracy of the proposed algorithm for the four-task classification reached 93.96% and 84.04%, respectively. Compared with other advanced algorithms, the average classification accuracy of the proposed algorithm was significantly improved, and the accuracy range error between subjects was significantly reduced in the public dataset. The results show that the proposed algorithm has good performance in multi-task classification, and can effectively improve the classification accuracy and robustness.

[Research on the feature representation of motor imagery electroencephalogram signal based on individual adaptation].

Aiming at the problem of low recognition accuracy of motor imagery electroencephalogram signal due to individual differences of subjects, an individual adaptive feature representation method of motor imagery electroencephalogram signal is proposed in this paper. Firstly, based on the individual differences and signal characteristics in different frequency bands, an adaptive channel selection method based on expansive relevant features with label F (ReliefF) was proposed. By extracting five time-frequency domain observation features of each frequency band signal, ReliefF algorithm was employed to evaluate the effectiveness of the frequency band signal in each channel, and then the corresponding signal channel was selected for each frequency band. Secondly, a feature representation method of common space pattern (CSP) based on fast correlation-based filter (FCBF) was proposed (CSP-FCBF). The features of electroencephalogram signal were extracted by CSP, and the best feature sets were obtained by using FCBF to optimize the features, so as to realize the effective state representation of motor imagery electroencephalogram signal. Finally, support vector machine (SVM) was adopted as a classifier to realize identification. Experimental results show that the proposed method in this research can effectively represent the states of motor imagery electroencephalogram signal, with an average identification accuracy of (83.0±5.5)% for four types of states, which is 6.6% higher than the traditional CSP feature representation method. The research results obtained in the feature representation of motor imagery electroencephalogram signal lay the foundation for the realization of adaptive electroencephalogram signal decoding and its application.

Noninvasive neuroimaging and spatial filter transform enable ultra low delay motor imagery EEG decoding.

Objective.The brain-computer interface (BCI) system based on sensorimotor rhythm can convert the human spirit into instructions for machine control, and it is a new human-computer interaction system with broad applications. However, the spatial resolution of scalp electroencephalogram (EEG) is limited due to the presence of volume conduction effects. Therefore, it is very meaningful to explore intracranial activities in a noninvasive way and improve the spatial resolution of EEG. Meanwhile, low-delay decoding is an essential factor for the development of a real-time BCI system.Approach.In this paper, EEG conduction is modeled by using public head anatomical templates, and cortical EEG is obtained using dynamic parameter statistical mapping. To solve the problem of a large amount of computation caused by the increase in the number of channels, the filter bank common spatial pattern method is used to obtain a spatial filter kernel, which reduces the computational cost of feature extraction to a linear level. And the feature classification and selection of important features are completed using a neural network containing band-spatial-time domain self-attention mechanisms.Main results.The results show that the method proposed in this paper achieves high accuracy for the four types of motor imagery EEG classification tasks, with fairly low latency and high physiological interpretability.Significance.The proposed decoding framework facilitates the realization of low-latency human-computer interaction systems.

An Intelligent Motor Imagery Detection System Using Electroencephalography with Adaptive Wavelets.

Classification of motor imagery (MI) tasks provides a robust solution for specially-abled people to connect with the milieu for brain-computer interface. Precise selection of uniform tuning parameters of tunable Q wavelet transform (TQWT) for electroencephalography (EEG) signals is arduous. Therefore, this paper proposes robust TQWT for automatically selecting optimum tuning parameters to decompose non-stationary EEG signals accurately. Three evolutionary optimization algorithms are explored for automating the tuning parameters of robust TQWT. The fitness function of the mean square error of decomposition is used. This paper also exploits channel selection using a Laplacian score for dominant channel selection. Important features elicited from sub-bands of robust TQWT are classified using different kernels of the least square support vector machine classifier. The radial basis function kernel has provided the highest accuracy of 99.78%, proving that the proposed method is superior to other state-of-the-art using the same database.

Subject-Dependent Artifact Removal for Enhancing Motor Imagery Classifier Performance under Poor Skills.

The Electroencephalography (EEG)-based motor imagery (MI) paradigm is one of the most studied technologies for Brain-Computer Interface (BCI) development. Still, the low Signal-to-Noise Ratio (SNR) poses a challenge when constructing EEG-based BCI systems. Moreover, the non-stationary and nonlinear signal issues, the low-spatial data resolution, and the inter- and intra-subject variability hamper the extraction of discriminant features. Indeed, subjects with poor motor skills have difficulties in practicing MI tasks against low SNR scenarios. Here, we propose a subject-dependent preprocessing approach that includes the well-known Surface Laplacian Filtering and Independent Component Analysis algorithms to remove signal artifacts based on the MI performance. In addition, power- and phase-based functional connectivity measures are studied to extract relevant and interpretable patterns and identify subjects of inefficency. As a result, our proposal, Subject-dependent Artifact Removal (SD-AR), improves the MI classification performance in subjects with poor motor skills. Consequently, electrooculography and volume-conduction EEG artifacts are mitigated within a functional connectivity feature-extraction strategy, which favors the classification performance of a straightforward linear classifier.

Towards Deep Radar Perception for Autonomous Driving: Datasets, Methods, and Challenges.

With recent developments, the performance of automotive radar has improved significantly. The next generation of 4D radar can achieve imaging capability in the form of high-resolution point clouds. In this context, we believe that the era of deep learning for radar perception has arrived. However, studies on radar deep learning are spread across different tasks, and a holistic overview is lacking. This review paper attempts to provide a big picture of the deep radar perception stack, including signal processing, datasets, labelling, data augmentation, and downstream tasks such as depth and velocity estimation, object detection, and sensor fusion. For these tasks, we focus on explaining how the network structure is adapted to radar domain knowledge. In particular, we summarise three overlooked challenges in deep radar perception, including multi-path effects, uncertainty problems, and adverse weather effects, and present some attempts to solve them.

Research on Dynamic Measurement Method of Flow Rate in Tea Processing.

Tea flow rate is a key indicator in tea production and processing. Due to the small real-time flow of tea leaves on the production line, the noise caused by the transmission system is greater than or close to the real signal of tea leaves. This issue may affect the dynamic measurement accuracy of tea flow. Therefore, a variational mode decomposition combined with a wavelet threshold (VMD-WT) denoising method is proposed to improve the accuracy of tea flow measurement. The denoising method of the tea flow signal based on VMD-WT is established, and the results are compared with WT, VMD, empirical mode decomposition (EMD), and empirical mode decomposition combined with wavelet threshold (EMD-WT). In addition, the dynamic measurement of different tea flow in tea processing is carried out. The result shows that the main noise of tea flow measurement comes from mechanical vibration. The VMD-WT method can effectively remove the noise in the tea dynamic weighing signal, and the denoising performance is better than WT, VMD, EMD, and EMD-WT methods. The average cumulative measurement accuracy of the tea flow signal based on the VMD-WT algorithm is 0.88%, which is 55% higher than that before denoising. This study provides an effective method for dynamic and accurate measurement of tea flow and offers technical support for digital control of the tea processing.

Manifold Approximating Graph Interpolation of Cardiac Local Activation Time.

OBJECTIVE: Local activation time (LAT) mapping of cardiac chambers is vital for targeted treatment of cardiac arrhythmias in catheter ablation procedures. Current methods require too many LAT observations for an accurate interpolation of the necessarily sparse LAT signal extracted from intracardiac electrograms (EGMs). Additionally, conventional performance metrics for LAT interpolation algorithms do not accurately measure the quality of interpolated maps. We propose, first, a novel method for spatial interpolation of the LAT signal which requires relatively few observations; second, a realistic sub-sampling protocol for LAT interpolation testing; and third, a new color-based metric for evaluation of interpolation quality that quantifies perceived differences in LAT maps. METHODS: We utilize a graph signal processing framework to reformulate the irregular spatial interpolation problem into a semi-supervised learning problem on the manifold with a closed-form solution. The metric proposed uses a color difference equation and color theory to quantify visual differences in generated LAT maps. RESULTS: We evaluate our approach on a dataset consisting of seven LAT maps from four patients obtained by the CARTO electroanatomic mapping system during premature ventricular complex (PVC) ablation procedures. Random sub-sampling and re-interpolation of the LAT observations show excellent accuracy for relatively few observations, achieving on average 6% lower error than state-of-the-art techniques for only 100 observations. CONCLUSION: Our study suggests that graph signal processing methods can improve LAT mapping for cardiac ablation procedures. SIGNIFICANCE: The proposed method can reduce patient time in surgery by decreasing the number of LAT observations needed for an accurate LAT map.

Cardi-Net: A deep neural network for classification of cardiac disease using phonocardiogram signal.

BACKGROUND AND OBJECTIVES: The lack of medical facilities in isolated areas makes many patients remain aloof from quick and timely diagnosis of cardiovascular diseases, leading to high mortality rates. A deep learning based method for automatic diagnosis of multiple cardiac diseases from Phonocardiogram (PCG) signals is proposed in this paper. METHODS: The proposed system is a combination of deep learning based convolutional neural network (CNN) and power spectrogram Cardi-Net, which can extract deep discriminating features of PCG signals from the power spectrogram to identify the diseases. The choice of Power Spectral Density (PSD) makes the model extract highly discriminatory features significant for the multi-classification of four common cardiac disorders. RESULTS: Data augmentation techniques are applied to make the model robust, and the model undergoes 10-fold cross-validation to yield an overall accuracy of 98.879% on the test dataset to diagnose multi heart diseases from PCG signals. CONCLUSION: The proposed model is completely automatic, where signal pre-processing and feature engineering are not required. The conversion time of power spectrogram from PCG signals is very low range from 0.10 s to 0.11 s. This reduces the complexity of the model, making it highly reliable and robust for real-time applications. The proposed architecture can be deployed on cloud and a low cost processor, desktop, android app leading to proper access to the dispensaries in remote areas.

Reducing calibration time in motor imagery-based BCIs by data alignment and empirical mode decomposition.

One of the major reasons that limit the practical applications of a brain-computer interface (BCI) is its long calibration time. In this paper, we propose a novel approach to reducing the calibration time of motor imagery (MI)-based BCIs without sacrificing classification accuracy. The approach aims to augment the training set size of a new subject by generating artificial electroencephalogram (EEG) data from a few training trials initially available. The artificial EEG data are obtained by first performing empirical mode decomposition (EMD) and then mixing resulting intrinsic mode functions (IMFs). The original training trials are aligned to common reference point with Euclidean alignment (EA) method prior to EMD and pooled together with artificial trials as the expended training set, which is input into a linear discriminant analysis (LDA) classifier or a logistic regression (LR) classifier. The performance of the proposed algorithm is evaluated on two motor imagery (MI) data sets and compared with that of the algorithm trained with only real EEG data (Baseline) and the algorithm trained with expanded EEG data by EMD without data alignment. The experimental results showed that the proposed algorithm can significantly reduce the amount of training data needed to achieve a given performance level and thus is expected to facilitate the real-world applications of MI-based BCIs.

Automated Detection of Caffeinated Coffee-Induced Short-Term Effects on ECG Signals Using EMD, DWT, and WPD.

The effect of coffee (caffeinated) on electro-cardiac activity is not yet sufficiently researched. In the current study, the occurrence of coffee-induced short-term changes in electrocardiogram (ECG) signals was examined. Further, a machine learning model that can efficiently detect coffee-induced alterations in cardiac activity is proposed. The ECG signals were decomposed using three different joint time-frequency decomposition methods: empirical mode decomposition, discrete wavelet transforms, and wavelet packet decomposition with varying decomposition parameters. Various statistical and entropy-based features were computed from the decomposed coefficients. The statistical significance of these features was computed using Wilcoxon's signed-rank (WSR) test for significance testing. The results of the WSR tests infer a significant change in many of these parameters after the consumption of coffee (caffeinated). Further, the analysis of the frequency bands of the decomposed coefficients reveals that most of the significant change was localized in the lower frequency band (<22.5 Hz). Herein, the performance of nine machine learning models is compared and a gradient-boosted tree classifier is proposed as the best model. The results suggest that the gradient-boosted tree (GBT) model that was developed using a db2 mother wavelet at level 2 decomposition shows the highest mean classification accuracy of 78%. The outcome of the current study will open up new possibilities in detecting the effects of drugs, various food products, and alcohol on cardiac functionality.